air wave pressure therapeutic apparatus -8797威尼斯老品牌

[product description and working principles]

snc-ip 1000 air wave pressure therapeutic instrument adopts intermittent circulation mode, which is quiet, painless and comfortable.

in the course of use, when the balloon of the leg belt is inflated and pressurized to the preset pressure value (50mmhg), the balloon will automatically deflate. after a period of time, the main engine begins the next round of the charging and deflating cycle, each cycle of charging and deflating is about 60s.

inflatable compression, ventilation and decompression can promote venous blood reflux, circulatory intermittent time can make blood vessels perfusion, maintain normal blood circulation.

1. installation

before wearing your leg belt, it is recommended to wear a cotton single coat to prevent slipped legs.

_unwrap the leg strap around the calf to make sure the air bag is close to the calf belly and the main engine is facing the outside of the calf (easy to operate).

2. start

after holding down the power button for 2 seconds, the main engine starts (will hear the "drop" sound), the led lights on (green), 5 seconds after entering the working state, continue to inflate the leg belt, when the leg belt balloon pressure reached the predetermined 50 mmhg, automatic deflation, 60 seconds for a cycle.

3. shutdown

after holding down the power button for 2 seconds, the main engine shuts down (you will hear a "drop"), the led lights go out, take off the leg strap, put it in order, together with the power adapter properly placed, stored in a cool, dry environment.

4. charge

the extrudable pressure belt is supplied by an internal direct battery. please charge for at least 11 hours before use or after long idle.

the power adapter outputs dc 5v 2a and has two output micro usb ports that can charge both hosts simultaneously.

1) shutdown state

when the host is connected to the power adapter, the led light flashes green when charging (there will be a "drop"); when the charging is completed, the green indicator lights out;

2) boot charging state

when the mainframe is connected to the power adapter, the led light flashes green (there will be a "drop" when charging; when the charging is completed, the green indicator light changes from flashing to constant light.